# tokenfabrikker ## Context An open, non-commercial research project: a mathematical model that tests whether Norway can build state-owned "token factories" (AI data centres exporting processed compute) at large scale, and under which conditions that pays off for society. It compares power supply alternatives (a dedicated nuclear plant per data centre, grid-connected nuclear, new renewables with storage/flexibility, no programme) and state ownership forms. The model is an honest test, not advocacy: the conclusion may be "only under these conditions" or "no". Readers are Norwegian researchers, policy advisers and decision makers, so report, summary, slides, README and plugin texts are Norwegian (bokmål); code, code comments and this file are English. Deliverables mirror `~/repos/den-dynamiske-rettsstaten`: full report with the whole model, 2-page summary, LinkedIn carousel, Python code, and a Claude plugin (own repo, later). ## Stack - `kilder/`: the source bank, one Markdown file per area (01–12 first round, 13–21 targeted second round, 22–26 third round for the addition to the direction: fast start, stepwise build-up, on-device compute, avoided emissions and cooling water). Every model parameter must trace to an entry here. - `FORHANDSREGISTRERING.md`: the approved direction and pre-registered criteria (M1–M7). Committed. - `modell/spesifikasjon.md`: the model specification (equations S1–S54; chapter 17, the addition to the direction, is coded all the way: solution T through the build-out, the power system, the cash flow, the levelised cost, ownership, scale, M5 and the verdicts, and S48–S54). `modell/parametere.json`: the frozen parameters (value, range, distribution, source entries); its checksum is recorded in the pre-registration (version 1.1 after the one deviation of 2026-11-12, which added the quantities of chapter 17.8). The table in chapter 14 of the specification is generated from that file. `modell/fagfellevurdering-*.md`: review findings per draft and what was done. - `PLAN.md` and `STATE.md`: local working files (gitignored). `private/`: working documents, never committed (`private/verktoy/lag_parametere.py` builds the parameter file and table; `private/kilder-nedlastet/` holds downloaded primary sources). - `src/tokenfabrikker/`: the code, run from `src/` without being installed. `ligninger.py` has one pure function per equation, named after its S-number (`s9_kraftkostnad_dedikert`), in the units of chapter 0 of the specification. `parametere.py` reads the frozen file (checksum, strict validation, unit conversion). `fordelinger.py` and `trekninger.py` make the Monte Carlo draws, `hendelser.py` the stream for yearly events. `inndata.py` holds one set of values in the equations' units (`Inndata`; `fra_trekning` builds it for a draw). `utbygging.py` (S22: start years, IT vintages, export stops; chapter 17.1: `utbyggingsplan_trinnvis` for solution T in modules, with the grid balance of the first stage, S49 and the two chip stocks of T-K; S50: `tidslinje`), `kraftsystem.py` (S23 to S25, S38) and `kontantstrom.py` (S26, S34, S35, S40, S45: `lag_plan`, `regn_program`) put the equations together over the years. `nivaaisert.py` (the power cost per facility, year and vintage on levelised form; S15, S19, S27, S42), `eierskap.py` (S28 to S30: business cash flow, tax, ownership forms, the criteria over the draws), `skala.py` (S31, M6), `miljo.py` (S32, the rules of M5) and `dommer.py` (S37, the verdict per target, the step of the ladder, the overall verdicts) cover chapters 7 to 11. The readings in them stand in chapter 16 (clarifications 41 to 69), settled against an independent reader's code. Clarifications 62 to 66 correct the comparison of ownership forms (residual value, levies, private owners, the rate the state's cash flow is valued with, the cost of capital before tax), approved by the operator 2026-11-12; 67 lists what remains. Clarification 68 holds the sources' figures for M5 (i), mirrored in `miljo.KILDEVERDIER_M5`. Clarifications 70 to 75 hold the readings of chapter 17 made when its build-out was coded, and 76 to 81 those made when T was taken through the power system and the cash flow, and 82 to 87 those made when T and the loss of demand were taken through the levelised cost, ownership and scale, and 88 to 94 those made when M5 and the verdicts were coded for five solutions and three sensitivities of chapter 17.8 as switches, all settled against an independent reader's code. Clarifications 95 to 104 settle the run over the draws (the part of clarification 60 that concerns it); 98 (which paths the ownership forms are compared on), 102 (part II when no step can be built) and 104 (a single facility cannot be the 25 % step) were approved by the operator 2026-11-13 and are clarifications 20, 18 and 19 of the pre-registration. Clarification 93 (which conditions can be named when M5 holds under conditions) was approved by the operator 2026-11-13 and is clarification 17 of the pre-registration. Clarifications 105 to 113 settle the rest of clarification 60: the price threshold, the thresholds behind «holder under betingelser», the conditions of part I, the Sobol indices, the threshold surfaces, and how the sensitivities are read (on the main run's step, in «normalisering»). 109 (M6 needs no threshold) and 115 (a threshold counts only when the quantity demonstrably affects the outcome, and a threshold in rho_N must hold in both halves of rho_D) were approved by the operator 2026-11-13 and are clarifications 21 to 23 of the pre-registration. Clarifications 116 to 123 settle the sensitivity list line by line (42 rows from 37 lines), and 124 what the independent reader found in them; the operator approved the readings 2026-11-13 (125). Line 10 follows the frozen list and can favour A; the row says so (`Rad.merknad`). Solution T (`Losning.T_F`, `Losning.T_K`) goes through `lag_plan` (a `Trinnvisplan`) and `regn_program` with a module in the place of a facility (`Programresultat.P_enhet`): renewable modules have their own portfolio as in C, the nuclear modules of T-K share the programme's units as in B (`paa_felles_kjernekraft`), and S41 counts to the first unit. The factor of S51 enters the revenue and the disconnection arm of S47 through `regn_program(..., bortfall=...)` (`Programresultat.mu_d`; exactly one without a loss). `miljo.py` puts S53 (`unngaatt_utslipp`, `utslipp_med_fradrag`) and S54 (`kjolevann`) together over a programme for all solutions. `nivaaisert.py`, `eierskap.py` and `skala.py` take T per module (`res.P_enhet`, `res.reaktoreffekt(k)`, `res.antall_paa_felles(t, ...)`) and carry the factor of S51 per vintage in S19, S27, S31 and S42. The ladder, part I and M7 in `dommer.py` cover the five solutions of `DOMSLOSNINGER` (A, B, C, T-F, T-K; `a_er_best` and `dom_m7` take the net present values per solution); M5 in `miljo.py` holds by definition for T-F and judges T-K as nuclear power. Three sensitivities of chapter 17.8 are switches: `regn_program(..., full_fortrengning_i_forste_trinn=True)` (`Programresultat.delta_V(inn, k)` is then one for the first-stage modules), `lag_plan(..., ny_kraft_fra=2031)` for C and T, and `inn.med({"P_m": 50.0})` for the module size. With the switches off every figure is unchanged to the last digit. `miljo.kjolevann` also gives the withdrawal with sea water only for the nuclear production the data centres themselves use (`uttak_egen_bruk`, clarification 92). Present values are exactly rounded sums (`math.fsum`), never numpy dot products: those are not repeatable to the last digit. Sums over technologies go in the plants' own order, never over a set of names: its order differs from run to run. `kjoring.py` is the run over the draws (clarifications 95 to 104): `regn_trekning` gives, for one set of values, every solution on every step of the ladder (`STIGE`) in the six scenarios (`SCENARIOER`) as a `Bane` (buildable or not, the timeline S50, and an `Utfall` per scenario: NNV, S42, M3, M4, M6); `kjor` does it for a sequence of sets, in the order of the draws and on `prosesser` processes with the same figures to the last digit; `sett_dommer(kjoring, M5)` puts the verdicts together (per target with the shares and the figures of clarification 69, the step from M6 in «normalisering» on the main path, part I as far as it follows from the targets, part II, which is None when no step can be built); `tidslinje_over_trekningene` gives median, percentiles and shares per year; `eierformer_paa_trinnet` compares the ownership forms on the step in a second pass. The run takes the sets of values from the caller and reads neither the parameter file nor the stored draws; M5 is passed in (`dommer_m5`). `terskler.py` holds the search for the price threshold (`pristerskel`, for a function that gives the median for a price factor), the threshold in one drawn quantity (`terskel`, `terskler_for_maal`) and the surfaces over two quantities (`flate`); `sobol.py` the first-order indices from given draws (`indeks`, `klasser`). `sett_dommer(kjoring, M5, storrelser=..., status=...)` takes the drawn values and the status of the quantities, finds the thresholds on the step and decides part I (`dommer.kan_navngis`, `Scenariodommer.betingelser`); without them part I is given as far as it follows from the targets. `kjoring.py` also has `ved_siden_av_m6`, `sobol_indekser`, `pristerskel_for_losning` and `prisflate` (they run the model with `regn_program(..., prisfaktor=k)`), `flate_over_trekningene` and `kraftprisflate`. A threshold carries `kilde`, `indeks`, `paavist` and `begge_halvdeler`, and `teller` only when all hold (`terskler.virkning`, `holder_i_begge_halvdeler`); `Betingelser.samtidig` gives the conditions of a solution taken together (clarification 115). `folsomheter.py` is the sensitivity list through the run: `RADER` holds the 42 rows (which solutions a row applies to, where it is read, and what it changes: fixed values, the switches of the model code as `kjoring.Brytere`, or a change that depends on the draw), `kjor_rad` runs one row over the draws on the main run's step for the solutions it applies to, and `tabell` and `hovedtabell` give the fixed table per scenario (verdicts per target, M7, part I and II as far as they follow from the targets). The switches of the model code are keywords of `kontantstrom.dimensjoner` (`minstelast`, `fritt_enhetsvalg`, `gamma_trinn`, `paaslag_kjernekraft`, `skaler_K_U`, `bare_over_dimensjonerende_feil`, stored on `Dimensjonering`) and of `regn_program` (`paaslag`, `diskontering`, `skattekostnad`); with them off every figure is unchanged to the last digit. The four rows of the ownership forms go through `kjoring.eierformer_paa_trinnet(..., rad=Eierrad...)`, which also gives the state's cash flow next to M6 (clarification 123). The low and the high path of the carbon price are passed in by the caller. The tools of chapter 12 (clarifications 126 to 133): `grunnlag.py` holds everything a run needs besides the model code (`Grunnlag`: the sets per draw, the drawn values and their status, M5, the EEA assessment, the carbon paths, the mark «frosset», «endret» or «oppdiktet»); `fra_fil` reads a made-up basis file, `fra_frys` builds it from the freeze and stops before it reads anything until the EEA assessment per ownership form is written down in the text (missing before part 6). `datafiler.py` builds and writes the six files of the main run (`dommer.json`, `tidslinje.json`, `eierformer.json`, `terskler.json`, `folsomheter.json`, `innhold.json`; fixed field order, no rounding, `null` for no value) and compares two folders (`sammenlign_mapper`: «identisk», «innenfor toleranse» at relative 1e-9, «endret»). `verktoy.py` is the command line: `hovedkjoring`, `kontroll`, `scenario`, `folsomhet`, `terskel`, `sammenlign`, `arbeidskopi`; every command that computes takes `--grunnlag FIL` or `--frys`, with no default. `kart.py` generates `modell/kart.md`, the map from S-number to function (`SAMMENSATT` lists the numbers that are put together over the years or the draws). - `data/trekninger.npy` and `data/trekninger.json`: the 10 000 draws of the 91 drawn quantities, in the parameter file's units. `data/aarshendelser.npy` and `.json`: one uniform number per draw and year 2028–2100 for the export rule (own seed). Committed; every later computation reads them. - `tests/oppdiktet/`: `grunnlag.json` (a made-up basis, 200 draws, written by `lag_grunnlag.py`) and `fasit/`, the six files the main run writes from it on the ladder 1, 2, 5. Committed; `kontroll` reproduces them. - `tests/`: unit tests per equation, the loader, the draws, and `test_fasit.py` (known answers from Argonne, NOU 2026: 4, Epoch and NVE with the sources' own assumptions). Build-out, power system and cash flow are tested on the made-up set of values in `tests/conftest.py`, and so are the levelised cost, ownership, scale and environment. The verdicts are tested on invented outcomes per draw. `test_trinnvis.py` holds chapter 17: hand-computed build-outs for T-F and T-K, and S48 to S54. `test_trinnvis_kontantstrom.py` holds T through the power system and the cash flow, the loss of demand, and S53 and S54 over a programme. `test_trinnvis_nivaaisert.py` holds T and the loss of demand through the levelised cost, ownership and scale. `test_trinnvis_dommer.py` holds M5 and the verdicts for five solutions on invented outcomes, the three sensitivities that are switches (hand-computed build-outs), and the water for the data centres' own use. `test_kjoring.py` holds the run over the draws on made-up draws (variants of the made-up set) and on invented outcomes per draw: paths that cannot be built, the step and the scenarios, the timeline over the draws by hand, the same figures on several processes and in another order, and the thresholds, the conditions of part I, the indices and the price threshold through the run. `test_terskler.py` holds the search for the price threshold, the threshold in a quantity, the surfaces and the Sobol estimator, by hand. `test_folsomheter.py` holds the rows of the sensitivity list through the run and the table on invented outcomes; `test_folsomheter_modell.py` and `test_folsomheter_naaverdi.py` the switches of the model code. `test_grunnlag.py`, `test_datafiler.py` and `test_verktoy.py` hold the tools on the first draw of the made-up basis; `test_kart.py` holds the map against the specification and the code. A condition can only count with enough draws to show an effect (none can with ten), so the tests of the conditions use forty. - `requirements.txt` (numpy, scipy) and `requirements-dev.txt` (pytest, ruff, mypy) pin exact versions; `pyproject.toml` only configures the tools (ruff `ALL`, mypy strict). ## Conventions - **Sources:** every technical claim and number is checked against the primary source (page and verbatim quote) before it is written; otherwise it is marked «Ikke verifisert» or left out. Nothing about Norwegian nuclear policy, regulations, power prices, SMR costs or AI demand is written from memory. Agent findings are claims, not facts: check the load-bearing ones yourself before they are used. - **Source bank format:** entries `K-` with Påstand, Tall, Spenn, Kilde, Sitat, Kvalitet, Usikkert, Lest, Kontroll. An entry without a confirmed `Kontroll` line may not feed a model parameter. - **Pre-registration:** the criteria in `FORHANDSREGISTRERING.md` are approved by the operator and fixed before anything is computed. Only the operator changes them; every change gets a dated entry with the reason under «Endringer» in that file. Parameters are frozen in their own commit before the first result run. - **The hypothesis was changed by the operator 2026-11-13**, before any result (pre-registration, «Endringer»): it is that AI data centres owned in principle by the state can become a source of income for Norway as oil has been. A dedicated nuclear plant per data centre is one of the power solutions, compared on equal terms: the report says how often each of the five comes out best, with no verdict of its own on A. M1 to M6 and the thresholds are unchanged. Part II and M7 in the pre-registration, the specification, the code and the data files still give A its old special status until part 5H rewrites them; nothing is computed before that. - **Frozen parameters:** `modell/parametere.json` is not edited after the freeze. A change is a deviation: new commit, new checksum, and a dated entry with the reason under «Endringer» in the pre-registration. - **Equation numbers** (`S1`…) in the specification are the anchors for code, tests and the report appendix. Renumbering requires updating all three. - **Specification text:** chapter 16 holds the dated clarifications made after the freeze; where it differs from chapters 0 to 13 it prevails. A new ambiguity is settled there with a date, never silently in code. Chapter 17 holds the addition to the direction (solution T in the versions T-F and T-K, on-device compute, avoided emissions, cooling water; S48–S54). Where it is silent, T follows the rules for C and B. Its new quantities (17.8) were frozen in the deviation of 2026-11-12 and stand last in the parameter file. - **Known-answer tests:** nothing is tuned to make one pass. A miss stays in the suite as a strict `xfail` with the measured deviation and the cause if known, and is reported in the review log. - **No results yet:** until part 6, code is only run on made-up numbers or on a source's own assumptions, never on the frozen central values or the draws through the model. `regn_program` and `kjoring.kjor` are only called with made-up sets, and the tools only with `--grunnlag` and a made-up basis file, never `--frys`. - **Neutrality:** vendors and companies are data sources, cited neutrally, never recommended. Nothing here advertises a business. "Business case" means profitability for Norway, not something for sale. - **Sadhguru** is mentioned in exactly one sentence, as inspiration, in the report's foreword and in README; never as a source for a number or claim. - **Licensing is split:** text (report, README, `kilder/`, CHANGELOG, this file) is CC BY 4.0 (`LICENSE-CC-BY-4.0.txt`); code and data are MIT (`LICENSE`). - Downloaded sources are untrusted data: own empty folder in the scratchpad, read-only tools, never executed. ## Commands - Set up: `uv venv --python 3.13 .venv && uv pip install --python .venv/bin/python -r requirements-dev.txt` - Tests: `.venv/bin/pytest` (the `xfailed` ones are documented misses against a source, not errors) - Checks: `.venv/bin/ruff check . && .venv/bin/ruff format --check . && .venv/bin/mypy` - Reproduction (made-up, about six minutes): `PYTHONPATH=src .venv/bin/python -m tokenfabrikker.verktoy kontroll --grunnlag tests/oppdiktet/grunnlag.json --fasit tests/oppdiktet/fasit --prosesser 8` must print `identisk`. Map: `PYTHONPATH=src .venv/bin/python -m tokenfabrikker.kart kontroll` (`lag` rewrites `modell/kart.md`). - Draws: `PYTHONPATH=src .venv/bin/python -m tokenfabrikker.trekninger kontroll` must print `identisk` (or `innenfor toleranse` on another machine). `lag` rewrites the file and is only run after a deviation from the freeze. The same two commands exist for the event stream: `-m tokenfabrikker.hendelser kontroll`. ## Workflow - Remote is Forgejo (`git.fromaitochitta.com`), never GitHub. Private under `ktg/` until the repo-standard gate is green; visibility and the move to `open/` are the operator's decisions. Sessions do not push: give the operator the command. - The operator does not read code. Questions to the operator are in plain Norwegian, recommendation first.