The K3 Arm E round (order 20260907T075834Z-18584396-from-.claude) measures a
rule that has not been written yet. This commit pins what the code does TODAY,
so the later claim "the default did not move" rests on a committed artifact
rather than on reading a diff.
Three characterization tests and one new golden fixture. Every count they
assert was measured against unmodified code before the test was written:
GRID_TABLE yields 3 candidates, TWO_TABLES_BLANK_SEPARATED yields 3,
TWO_TABLES_RULE_SEPARATED 2, PIPE_TABLE 1, PROSE_WITH_A_STRAY_RULE 1.
The second golden is not duplication. `propose-golden-default.json` is taken
over `OUTLINE_DOCUMENT`, which contains no `|` row and no `+` rule line, so no
table rule -- present or future -- can move its bytes. It is a guard that
cannot fire. `propose-golden-grid-default.json` is taken over a document that
has a pandoc grid table, and it is generated here from PRE-Arm-E code: a
fixture recorded after the change would pin post-change bytes and prove
nothing about the default.
Two fixture shapes are load bearing and say so in the band's comment. The
second table in TWO_TABLES_BLANK_SEPARATED has exactly ONE row group, so it
cannot be joined -- that is the only shape that catches a join whose pending
state is never cleared. And `propose()` is excluded from this band: it pops
`source` and discards every other kwarg, so an Arm E test written through it
would silently measure the default and pass.
Tests first: 1 red (the golden did not exist), then green. 1230 -> 1233.
ruff check: exit 0. ruff format --check: exit 0. pytest -q: exit 0.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
`docs/2026-09-04-k2-pptx-odt-rtf.md` measured the corpus denominator for
these three office rows and found it ZERO: `K2/trinn1` holds 43 files and
not one of them is a `pptx`, an `odt` or an `rtf`. So `extract._EVIDENCE`
calls those rows `unmeasured` in the strongest sense available -- they
work by construction and had never met a document at all.
This is the smallest thing that changes that without inventing a corpus.
One authored document -- a title, an intro, a 20-row label/value table, a
caption and a 4x4 grid -- laid out three times in three containers, so
the container and its reader are the only variable between the three
measurements. `k2-office-fasit.json` carries the hand count taken from
the AUTHORED content rather than from any converter's output: 56 cells,
20 pairs, 59 distinct strings, shared by all three. It is committed here,
before the measurement runs, because a fasit written afterwards is a
description of a result rather than a denominator for it.
No converter wrote any of these files. `make_k2_office.py` lays every
part by hand, for the reason `make_fixtures.py` already states and this
set inherits: a file written by the converter and then read by the
converter proves only that the converter agrees with itself, and stays
green through any conversion defect that is symmetric. The commissioning
order offered pandoc as one generator option; the committed fixture
policy forbids it and the policy wins.
Two converter behaviours were measured while laying the RTF out, both of
them structurally plausible input read silently wrong, exit code 0 and no
warning. Without `\pard\intbl` on cell paragraphs, consecutive
`\trowd...\row` rows come back as each row NESTED inside the previous
one: five label/value rows read as five levels of nested table, 2076
characters where 117 were expected. And the `\uN?` unicode escape -- the
form Word emits -- loses the character after it: `A\u248?BC` reads back
as `AoC` with the `B` gone, `A\u248?xBC` reads back as `AoBC`. The
fixture writes `\uN ?` with an explicit space, which round-trips. Neither
is worked around anywhere in `src/`.
The generator and the fasit live one level above `k2-office/` and that is
not tidiness: Door B walks its drop directory recursively, so anything
parked beside the three documents would enter the run and N would stop
being 3.
Three synthetic documents in one house style are not a corpus. The rows
stay `unmeasured` and the suite asserts that they do.
Suite 1132 passed (1127 + 5), `ruff check` and `ruff format --check`
clean.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Three hand-laid OOXML containers, every part written out by hand and zipped
with a fixed date_time so they are byte-reproducible. No converter output
anywhere in them: a .docx written by the converter and read by the converter
proves only that the converter agrees with itself, and would stay green through
any conversion defect that is symmetric -- which is most of them.
two-line-krav.docx heading + label/value on one line (the docx mirror of
the PDF fixture)
no-styles-krav.docx the SAME document without word/styles.xml
two-line-krav.xlsx sheet name as heading + label/value on one row
THE FIXTURES FOUND A REAL DEFECT IN THE SEAM THEY WERE MEANT TO PIN. The
converter call used pypandoc's TEXT entry point, which takes an `encoding`
because it treats its source as text -- and that corrupts a zip. The xlsx
fixture failed with `Failed to unpack XLSX archive: not enough bytes` while
reading correctly from disk with the same binary. The docx of the same shape
happened to survive, which is the part worth writing down: the defect is silent
for some inputs and fatal for others, so "it worked on the file I tried" was
never evidence. Input now goes through a temporary file.
Two measurements while building, both the same shape -- structurally valid
input, silently reduced output, exit code 0, no warning:
- Without word/styles.xml the docx extracts as flat prose with no heading. A
fixture lacking that part would pin the body and pin nothing about structure.
Committed as a negative control that RUNS rather than a sentence in a README.
- With inline strings rather than a shared string table, the xlsx extracts with
the sheet name intact and every cell value gone. The fixture uses a dimension
element and a shared string table instead.
The frozen literals are pinned to a NAMED converter version, asserted beside
them: a frozen literal without one says "these bytes" without saying what
produced them.
Suite 908 -> 913. Fixtures regenerate byte-identically.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Order G2a. Populates the optional `[extract]` extra for the first time with
one parser, `pdfplumber>=0.11.10,<0.12` (MIT), and wires `pdf` through it.
The default install is untouched: exactly one runtime dependency, stdlib
otherwise, enforced by test_packaging.py.
The gate for `pdf` becomes an import probe rather than a frozenset membership
test, exactly as extract.py's docstring had promised. The rejection does not
change: without the extra, `pdf` still raises `extractor_extra_missing` with
the same message. That behaviour is asserted UNCONDITIONALLY via a sys.modules
monkeypatch, so it holds on machines where the parser is installed too — a
skip would have preserved nothing there. Verified in a clean venv without the
extra: 589 passed, 7 skipped; with it, 596 passed.
`docx`/`xlsx` are unchanged and still fail fast — the extra names exactly what
it ships.
The parser choice was forced by measurement, not preference (b73dd9d,
docs/2026-08-21-g2-pdf-extraction-measurement.md): on a real requirement table
pdfplumber keeps 4 of 4 rows with label and value on one line, where pypdf,
pdfminer.six and pymupdf each keep 0 of 4. pymupdf is additionally out on
licence (AGPL-3.0), which an MIT package must not push onto a consumer.
Three facts from that measurement are now carried in code rather than in a
report:
- Extracted text is pinned to an exact transitive parser version
(pdfplumber pins pdfminer.six==20260107; date-stamped, no stability
contract). tests/test_extract.py freezes the expected text of a committed
hand-written fixture so a parser upgrade breaks something visible instead of
drifting silently. Reasoning at the declaration site and in
tests/fixtures/README.md.
- Determinism within a version is now held by a test, not only measured once.
- Drawn content does not survive extraction. Every pdf extraction emits the
new `ExtractionWarning`: figures have no text to recover, so a bundle built
from drawn documents is incomplete by construction. Stated categorically
rather than detected — deciding "is there a figure here" is the layout
heuristic G2b declined.
Two new error codes, both mirroring existing patterns: `extractor_empty_pdf`
(a scanned/image-only PDF, refused rather than persisted as an empty concept)
and `extractor_pdf_error` (parser failure wrapped, never leaked).
Structured table recovery (G2b) is NOT implemented and is documented as out of
scope: two independent parsers return the same wrong shape, so the breakage is
document geometry, not a library choice. PDFs enter as prose.
Also corrects an install promise this change would otherwise have published:
the README no longer presents a bare `pip install 'llm-ingestion-okf[extract]'`
as working, because the package is not on an index.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01HtNhsdHnMGtMi7U2mvMU8z
